FM Approved Remote Kit for Q9 Display
FLOMEC® Genuine Accessory
FITS THESE PRODUCTS
TM METER - Q9 DISPLAY | G2 METER - Q9 DISPLAY | A1 METER - Q9 DISPLAY | 03A METER - Q9 DISPLAY | 03N METER - Q9 DISPLAY
WHAT'S IN THE BOX
(1) Sensor module assembly, (1) dust cover assembly, (1) installation template, (2) ring terminals, (2) nuts, (4) 4-20 x 3/8-inch, CR, FILL HD, SS Tap screws, (4) 3mm-1.12mm x 35mm, SS PHCR screws, (4) 4-40 x 1.2-inch, Ss, SHCS screws, (1) FM Remote Kit ATEX Guide, (1) Owners Manual, (1) Declaration of Conformity
The Factory Mutual (FM) Approved Remote Kit Assembly modifies FLOMEC® electronic digital meters for applications in specialized situations including remote indication and high or low fluid temperature metering applications. This kit provides the versatility of panel mounting of the LCD readout up to 100 feet (30 meters) from the turbine. This kit consists of a sensor module, a dust cover assembly, and 10 feet (3 meters) of cable. Requires a complete meter with a Q9 display.
NOTE: To maintain the Factory Mutual Approval of this kit it must be installed in accordance with the instructions given in the owner's manual. It must also be used with a FLOMEC Factory Mutual Approved meter. When the installation is complete, the Factory Mutual decal should appear on the turbine, sensor, and dustcover. Installing this kit onto a non-FM-approved meter assembly will not make the assembly FM Approved.
NOTE: To retain Factory Mutual Approval of this kit, use only Belden Cable #9501, 2 wire shielded.
| SPECIFICATIONS | |
|---|---|
| Magnetic Pickup: | 1.3k Ohm, 90mH |
| Signal Type: | Sine Wave |
| Voltage: | Peak to Peak, 10 mV to 500 mV |
| Frequency: | 11 to 608 Hz |
| Cable: | 10 ft. (3 m), 2-conductor shielded, Belden #9501 |
Maintains FM Approval
Accommodates fluid temperatures from -40°F to +250°F (-40°C to +121°C) depending on meter
This kit can upgrade an existing FLOMEC meter (with Q9 display) or can be purchased with a new meter
Battery-powered display, no additional power required
Use with the A1, G2, TM, and 03 Series meters