Products

12 ft. (3.7 m) fuel hose with static wire for AC and DC electric fuel transfer pumps and hand pumps. 3/4-inch NPT connections support safe, reliabl...

UL listed 18 ft. (5.5 m) fuel hose with static wire for AC and DC electric fuel transfer pumps and hand pumps. 3/4-inch NPT connections for safe fu...

GPI's adjustable suction pipe provide the best seal technology on the market. Adjusts from 15 to 40 inches to fit most standard tank sizes. The sol...

10 micron, 18 GPM (69 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

18 GPM 10 micron particulate filter kit for fuel transfer pumps. Helps remove contaminants to protect pumps and maintain clean fuel flow. NOTE: May...

10 micron water and particulate filter for use with fuel transfer pumps up to 18 GPM (69 L/min), with No 1-12 UNF mounting thread. 50PSI operating ...

2-inch NPT standard tank bung adapter for fuel transfer pumps. Includes tank bung adapter bushing and NBR rubber union ring gasket.

2-micron Bio-Tek water & particulate filter delivers up to 25 GPM (94 L/min), with 1 - 12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

Complete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...

GPI Multi-Plane Hose Swivel attaches between a fuel hose and nozzle, providing 360 spherical rotation. The lightweight swivel prevents hose twistin...

3/4-inch NPT cast aluminum filter adapter rated for 18 GPM fuel transfer pumps. Supports secure filter installation and helps protect pump systems.

Automatic unleaded shut-off nozzle is designed to attach to a 0.75 in. fuel hose for safe, reliable dispensing of gasoline, diesel fuel, and kerose...

GPI's 3/4-inch FNPT Black Diamond no-fail manual nozzle is the most durable, best performance nozzle on the market!

Composite suction pipe extension for fuel transfer pumps. Adds 15 inches to GPI adjustable suction pipe for deeper tank reach.

While supplies last, pick up this GPI-branded 10-micron particulate filter with drain valve for use with fuel transfer pumps up to 18 GPM (69 L/min...

While supplies last, pick up this GPI-branded 10-micron particulate filter for use with fuel transfer pumps up to 18 GPM (69 L/min). Short filter d...

While supplies last, pick up this GPI-branded 30-micron particulate filter for use with fuel transfer pumps up to 18 GPM (69 L/min). 50 PSI operati...

Circuit breaker and switch kit for M-1115 fuel transfer pumps. Genuine replacement parts restore safe electrical control and operation.

Replacement motor for M-1115S fuel transfer pumps. OEM part compatible with M-1115S-AU, M-1115S-MU, and M-1115S-PO models to extend pump service life.

Gear cover plate replacement kit for M-1115S, M-150S, and M-240S fuel transfer pumps. Does not fit M-180S (use kit #110500-08). Designed for easy i...

Replacement switch cover plate kit for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Easy to install and designed to protect internal co...

Wet seal kit for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Designed to replace worn seals and extend pump service life. Quick and ea...

Electrical cover plate replacement kit for M-Series fuel transfer pumps. Easy installation helps protect wiring and maintain reliable operation.

Replacement inlet strainer for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Helps protect pumps and maintain peak performance.