M-150 Parts & Accessories

Keep your M-Series fuel transfer pump flow rate high with the easy-to-install bypass poppet replacement kit. DOES NOT fit M-180S - Look for kit #11...

The GPI Gear Pump Overhaul and Conversion Kit is designed to help keep GPI 12-volt, 24-volt, and 115-volt gear pumps running as long as possible. C...

The GPI Gear Pump Wet Seal Kit is designed to help keep GPI 12-volt, 24-volt, and 115-volt gear pumps running as long as possible. Quick and easy i...

Keep your M-Series fuel transfer pump well maintained with this easy-to-install Electrical Coverplate replacement kit.

Keep your M-Series fuel transfer pump well maintained with this easy-to-install Gear Coverplate replacement kit. DOES NOT fit M-180S - Look for kit...

Keep your M-Series fuel transfer pump well-maintained with this easy-to-install Switch Coverplate replacement kit.

This inlet strainer fits M-Series fuel transfer pumps. Easily replace your strainer when you need to keep your pump running at peak performance.

The GPI 119200-551 replacement motor helps extend the life of the M-150S Series fuel transfer pump. This user-friendly OEM part is compatible with ...

GPI 110242-01, 18ft. (5.5 m) Power Cord Assembly with Strain Relief Connector is designed for use with GPI G20, M-150S, M-180S, and M-240 Series pu...

GPI 110929-01 is a 22 ft. (6.7 m) long, 12/2 AWG power cord for G20, M-150, M-180, and M-240 12V DC fuel transfer pumps

GPI Inline Blade Fuse Assembly with 25A fuse provides overcurrent protection for your M-150 fuel transfer pump.

This cast aluminum nozzle cover kit can be used with an EZ-8, M-150S-EM, or M-150S-E-PO fuel transfer pump. The kit comes with (2) 1/4-20 x 1/2-in...

GPI Particulate Filter Kit for electric fuel transfer pumps. It helps remove dirt, dust, rust, and other common fuel contaminants to protect your f...

GPI 10 micron, 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread.NOTE: May substitute for a fi...

GPI 10 micron water and particulate filter for use with fuel transfer pumps up to 18 GPM with No 1-12 UNF mounting thread.NOTE: May substitute for ...

GPI 10 micron 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread includes draincock.NOTE: May s...

GPI 2-micron Bio-Tek water & particulate filter delivers up to 25 GPM (95 L/min), with 1 - 12 UNF mounting thread.NOTE: May substitute for a fi...

Use GPI 3/4-inch NPT Cast aluminum filter adapter to complete your filter installation setup on your fueling system. Protect your pump today with G...

Complete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...

The GPI Electric Fuel Pump Bung Adapter Kit (#110909) includes a tank bung adapter bushing and an NBR rubber union ring gasket.

The GPI 110382-501 inlet fitting kit includes one 2-inch NPT x 1.25-inch NPSM inlet fitting with O-Ring. This part is compatible with M-150S 12V GP...

Keep your GPI M-Series or G20 fuel transfer pump-to-tank connection leak free with this replacement gasket.