GPI-GPRO Accessories

Quick-Fit 25 GPM, (94 Lmin) replacement filter for GPI and GPRO modular fuel transfer pumps. Removes dust, dirt, rust, and other contaminants to pr...

2-micron Bio-Tek water & particulate filter delivers up to 25 GPM (94 L/min), with 1 - 12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

30 GPM (114 L/min) 10 micron water and particulate filter for fuel transfer pumps. 1-1/2-16 UNF mounting thread. Helps remove water and contaminant...

2 micron Bio-Tek water & particulate filter for use with fuel transfer pumps up to 40 GPM (151 L/min). 50 PSI operating pressure. NOTE: May sub...

1-inch NPT 40 GPM 30 micron filter kit for fuel transfer pumps. Helps remove rust and debris to protect high-flow fueling systems. NOTE: May substi...

3/4-inch NPT cast aluminum filter adapter rated for 18 GPM fuel transfer pumps. Supports secure filter installation and helps protect pump systems.

1-inch NPT cast aluminum filter adapter for fuel transfer pumps. Supports 25 GPM installations and helps protect pumps during filter setup.

Complete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...

Cast iron filter adapter for fuel transfer pumps. 1-inch NPT, rated for 25 GPM 94 L/min) with 1 3/8-inch - 12 UNF filter compatibility for secure i...

Heavy-duty 1-inch aluminum filter adapter for use with GPRO fuel transfer pumps. Protect your equipment today with the complete filter installation...

Quick-Fit 3/4-inch NPT, 90-degree outlet kit for G-Series and V-Series fuel transfer pumps, M30 meters, and QM40 meters. The kit comes with an O-Ri...

Quick-Fit 1-inch NPT 90� outlet kit for G and V Series pumps, M30 and QM40 meters. Kit includes an O-Ring for a leak-proof seal, 4 SHCS screws, and...

Quick-Fit hardware kit for G-Series and V-Series fuel transfer pumps. Compatible with modular Quick-Fit accessories for secure installation.

15ft. (4.5 m) power cord assembly with strain relief connector is designed for use with GPI EZ-8 Series pumps. The 14/2 AWG cord comes with an easy...

12/2 AWG 18ft. (5.5 m) power cord assembly with strain relief connector is designed for use with GPI G20, M-150S, M-180S, and M-240 Series pumps. T...

10 gauge 18 ft power cord assembly for GPRO V25 series fuel transfer pumps. Includes 10/2 AWG cord and strain relief connector for durability, wate...

12/2 AWG, 22 ft. (6.7 m) power cord for 12V fuel transfer pumps. Compatible with G20, M-150, M-180, and M-240 12V DC models for reliable power deli...

Battery Clamp Kit is designed to quickly and conveniently connect a 12V or 24V (DC) fuel transfer gear pump to a DC power supply. Includes two 50 A...

Heavy duty battery clamp kit for 12V fuel transfer pumps. 600 amp clamps with heavy copper terminals and vinyl-clad handles support secure, high-cu...

8 ft. (2.4 m) hose assembly with static wire for L-Series oil transfer pumps. 3/4-inch NPT x 3/4-inch connections for safe, reliable fluid transfer.

8 ft. (2.4 m) fuel hose with static wire for G8P fuel transfer pumps. 3/4-inch NPT x 5/8-inch hose supports safe, reliable fuel transfer.

12 ft. (3.7 m) fuel hose with static wire for AC and DC electric fuel transfer pumps and hand pumps. 3/4-inch NPT connections support safe, reliabl...

UL listed 18 ft. (5.5 m) fuel hose with static wire for AC and DC electric fuel transfer pumps and hand pumps. 3/4-inch NPT connections for safe fu...

20 ft. (6.10 m) fuel hose with static wire for AC and DC electric fuel transfer pumps and hand pumps. 3/4-inch NPT connections support safe, reliab...