M-240 Parts & Accessories

Keep your M-Series fuel transfer pump flow rate high with the easy-to-install bypass poppet replacement kit. DOES NOT fit M-180S - Look for kit #11...

GPI 110242-01, 18ft. (5.5 m) Power Cord Assembly with Strain Relief Connector is designed for use with GPI G20, M-150S, M-180S, and M-240 Series pu...

GPI 110929-01 is a 22 ft. (6.7 m) long, 12/2 AWG power cord for G20, M-150, M-180, and M-240 12V DC fuel transfer pumps

Keep your M-Series fuel transfer pump well maintained with this easy-to-install Electrical Coverplate replacement kit.

The GPI Gear Pump Overhaul and Conversion Kit is designed to help keep GPI 12-volt, 24-volt, and 115-volt gear pumps running as long as possible. C...

Keep your M-Series fuel transfer pump well maintained with this easy-to-install Gear Coverplate replacement kit. DOES NOT fit M-180S - Look for kit...

This inlet strainer fits M-Series fuel transfer pumps. Easily replace your strainer when you need to keep your pump running at peak performance.

The GPI Gear Pump Wet Seal Kit is designed to help keep GPI 12-volt, 24-volt, and 115-volt gear pumps running as long as possible. Quick and easy i...

Keep your M-Series fuel transfer pump well-maintained with this easy-to-install Switch Coverplate replacement kit.

The GPI Electric Fuel Pump Bung Adapter Kit (#110909) includes a tank bung adapter bushing and an NBR rubber union ring gasket.

Keep your GPI M-Series or G20 fuel transfer pump-to-tank connection leak free with this replacement gasket.

GPI Adjustable suction pipes provide the best seal technology on the market. Adjusts from 15 to 40 inches to fit most standard tank sizes. The soli...

GPI's fuel suction pipe extension will add another 15 inches to your adjustable GPI composite suction pipe.

GPI Particulate Filter Kit for electric fuel transfer pumps. It helps remove dirt, dust, rust, and other common fuel contaminants to protect your f...

GPI 10 micron, 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread.NOTE: May substitute for a fi...

GPI 10 micron water and particulate filter for use with fuel transfer pumps up to 18 GPM with No 1-12 UNF mounting thread.NOTE: May substitute for ...

GPI 10 micron 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread includes draincock.NOTE: May s...

GPI 2-micron Bio-Tek water & particulate filter delivers up to 25 GPM (95 L/min), with 1 - 12 UNF mounting thread.NOTE: May substitute for a fi...

Use GPI 3/4-inch NPT Cast aluminum filter adapter to complete your filter installation setup on your fueling system. Protect your pump today with G...

Complete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...

Complete your fueling system today with GPI's 3/4 in. NPT x 14 ft. (4.3 m) fuel hose kit with spring support and static wire for use with AC or DC ...

GPI's 3/4 in. NPT x 18 ft. (5.5 m) U.L. Listed fuel hose assembly with static wire for use with AC or DC electric fuel transfer pumps and hand pumps.

GPI Multi-Plane Hose Swivel attaches between a fuel hose and nozzle, providing 360 spherical rotation. The lightweight swivel prevents hose twistin...