M-240 Parts & Accessories

Bypass poppet kit for M-150S, M-240S, and M-1115S fuel transfer pumps. Helps maintain flow rate. Does not fit M-180S (use kit #110500-05).

Replacement motor for M-240S fuel transfer pumps. OEM part compatible with M-240S-MU and M-240S-PO models to extend pump service life.

12/2 AWG 18ft. (5.5 m) power cord assembly with strain relief connector is designed for use with GPI G20, M-150S, M-180S, and M-240 Series pumps. T...

12/2 AWG, 22 ft. (6.7 m) power cord for 12V fuel transfer pumps. Compatible with G20, M-150, M-180, and M-240 12V DC models for reliable power deli...

15 amp inline blade fuse assembly for M-240 fuel transfer pumps. Provides overcurrent protection to support safe, reliable pump operation.

Nozzle cover kit for M-Series fuel transfer pumps. Genuine replacement kit designed to protect nozzle assemblies and restore proper fit.

Replacement power switch for M-240 fuel transfer pumps. Designed for quick field repair to restore safe, reliable pump operation.

Electrical cover plate replacement kit for M-Series fuel transfer pumps. Easy installation helps protect wiring and maintain reliable operation.

The GPI gear pump overhaul and conversion kit is designed to help keep GPI 12-volt, 24-volt, and 115-volt gear pumps running as long as possible. C...

Gear cover plate replacement kit for M-1115S, M-150S, and M-240S fuel transfer pumps. Does not fit M-180S (use kit #110500-08). Designed for easy i...

Replacement inlet strainer for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Helps protect pumps and maintain peak performance.

Wet seal kit for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Designed to replace worn seals and extend pump service life. Quick and ea...

Replacement switch cover plate kit for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Easy to install and designed to protect internal co...

2-inch NPT standard tank bung adapter for fuel transfer pumps. Includes tank bung adapter bushing and NBR rubber union ring gasket.

Replacement NBR union ring gasket for M-Series and G20 fuel transfer pumps. Helps maintain a leak-free pump-to-tank connection.

GPI's adjustable suction pipe provide the best seal technology on the market. Adjusts from 15 to 40 inches to fit most standard tank sizes. The sol...

Composite suction pipe extension for fuel transfer pumps. Adds 15 inches to GPI adjustable suction pipe for deeper tank reach.

18 GPM 10 micron particulate filter kit for fuel transfer pumps. Helps remove contaminants to protect pumps and maintain clean fuel flow. NOTE: May...

10 micron, 18 GPM (69 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

10 micron water and particulate filter for use with fuel transfer pumps up to 18 GPM (69 L/min), with No 1-12 UNF mounting thread. 50PSI operating ...

2-micron Bio-Tek water & particulate filter delivers up to 25 GPM (94 L/min), with 1 - 12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

3/4-inch NPT cast aluminum filter adapter rated for 18 GPM fuel transfer pumps. Supports secure filter installation and helps protect pump systems.

Complete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...

GPI Multi-Plane Hose Swivel attaches between a fuel hose and nozzle, providing 360 spherical rotation. The lightweight swivel prevents hose twistin...