New products

While supplies last, pick up this GPI-branded 30-micron particulate filter for use with fuel transfer pumps up to 18 GPM (69 L/min). 50 PSI operati...

While supplies last, pick up this GPI-branded 10-micron particulate filter for use with fuel transfer pumps up to 18 GPM (69 L/min). Short filter d...

While supplies last, pick up this GPI-branded 10-micron particulate filter with drain valve for use with fuel transfer pumps up to 18 GPM (69 L/min...

UL listed 18 ft. (5.5 m) fuel hose with static wire for AC and DC electric fuel transfer pumps and hand pumps. 3/4-inch NPT connections for safe fu...

12 ft. (3.7 m) fuel hose with static wire for AC and DC electric fuel transfer pumps and hand pumps. 3/4-inch NPT connections support safe, reliabl...

Replacement switch cover plate kit for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Easy to install and designed to protect internal co...

Wet seal kit for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Designed to replace worn seals and extend pump service life. Quick and ea...

25 amp inline blade fuse assembly for M-150 fuel transfer pumps. Provides overcurrent protection to support safe, reliable pump operation.

Battery Clamp Kit is designed to quickly and conveniently connect a 12V or 24V (DC) fuel transfer gear pump to a DC power supply. Includes two 50 A...

Replacement NBR union ring gasket for M-Series and G20 fuel transfer pumps. Helps maintain a leak-free pump-to-tank connection.

Direct mount inlet fitting kit forM-150 12V fuel transfer pumps. Also, for use with EZ-8 direct mount models manufactured August 07, 2020, or later...

Replacement inlet strainer for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Helps protect pumps and maintain peak performance.

Nozzle cover kit for M-Series fuel transfer pumps. Genuine replacement kit designed to protect nozzle assemblies and restore proper fit.

Replacement motor for M-150S fuel transfer pumps. OEM part compatible with M-150S-AU, M-150S-MU, M-150S-EM, M-150S-PO, and M-150S-E-PO models to e...

Gear cover plate replacement kit for M-1115S, M-150S, and M-240S fuel transfer pumps. Does not fit M-180S (use kit #110500-08). Designed for easy i...

Bypass poppet kit for M-150S, M-240S, and M-1115S fuel transfer pumps. Helps maintain flow rate. Does not fit M-180S (use kit #110500-05).

Electrical cover plate replacement kit for M-Series fuel transfer pumps. Easy installation helps protect wiring and maintain reliable operation.

Heavy duty battery clamp kit for 12V fuel transfer pumps. 600 amp clamps with heavy copper terminals and vinyl-clad handles support secure, high-cu...

2-inch NPT standard tank bung adapter for fuel transfer pumps. Includes tank bung adapter bushing and NBR rubber union ring gasket.

18 GPM 10 micron particulate filter kit for fuel transfer pumps. Helps remove contaminants to protect pumps and maintain clean fuel flow. NOTE: May...

3/4-inch NPT cast aluminum filter adapter rated for 18 GPM fuel transfer pumps. Supports secure filter installation and helps protect pump systems.

12/2 AWG, 22 ft. (6.7 m) power cord for 12V fuel transfer pumps. Compatible with G20, M-150, M-180, and M-240 12V DC models for reliable power deli...

12/2 AWG 18ft. (5.5 m) power cord assembly with strain relief connector is designed for use with GPI G20, M-150S, M-180S, and M-240 Series pumps. T...

Circuit breaker power switch for M-150 fuel transfer pumps. Genuine replacement part for quick field repair and safe operation.