Products

Battery Clamp Kit is designed to quickly and conveniently connect a 12V or 24V (DC) fuel transfer gear pump to a DC power supply. Includes two 50 A...

15ft. (4.5 m) power cord assembly with strain relief connector is designed for use with GPI EZ-8 Series pumps. The 14/2 AWG cord comes with an easy...

Heavy duty battery clamp kit for 12V fuel transfer pumps. 600 amp clamps with heavy copper terminals and vinyl-clad handles support secure, high-cu...

Replacement toggle switch for 12V fuel transfer pumps. Genuine part designed for quick field installation and reliable electrical control.

12 ft. (3.7 m) fuel hose with static wire for AC and DC electric fuel transfer pumps and hand pumps. 3/4-inch NPT connections support safe, reliabl...

Direct mount inlet fitting kit forM-150 12V fuel transfer pumps. Also, for use with EZ-8 direct mount models manufactured August 07, 2020, or later...

Cast aluminum nozzle cover kit for EZ-8, M-150S-EM, or M-150S-E-PO fuel transfer pumps. The kit includes (2) 1/4-20 x 1/2-inch Hex Head Tapping scr...

Replacement switch cover plate kit for EZ-8 fuel transfer pumps. Easy to install and designed to protect internal components and maintain reliable ...

20 amp inline fuse assembly for EZ-8 fuel transfer pumps. Provides overcurrent protection to support safe, reliable pump operation.

Easy-to-install bypass poppet kit for EZ-8 fuel transfer pumps. Helps maintain proper flow rate and supports reliable pump performance with easy in...

Direct mount bung adapter for EZ-8 12V fuel transfer pumps. Includes 1-inch NPT adapter for secure installation on compatible 12V models. For pumps...

Gear cover plate replacement kit for EZ-8 fuel transfer pumps. Includes cover plate and O-ring to restore sealing and protect internal parts.

Rebuild kit for EZ-8 fuel transfer pumps manufactured 2016 and later. Includes components needed to restore pump performance.

Rebuild kit for EZ-8 fuel transfer pumps manufactured before 2016. Includes a motor shaft key, two gears, & a set of replacement seals.

Replacement motor for EZ-8 fuel transfer pumps. Includes motor assembly and switch to restore reliable pump operation. NOTE: For EZ-8 pumps manufac...

GPI's adjustable suction pipe provide the best seal technology on the market. Adjusts from 15 to 40 inches to fit most standard tank sizes. The sol...

10 micron, 18 GPM (69 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

18 GPM 10 micron particulate filter kit for fuel transfer pumps. Helps remove contaminants to protect pumps and maintain clean fuel flow. NOTE: May...

10 micron water and particulate filter for use with fuel transfer pumps up to 18 GPM (69 L/min), with No 1-12 UNF mounting thread. 50PSI operating ...

2-inch NPT standard tank bung adapter for fuel transfer pumps. Includes tank bung adapter bushing and NBR rubber union ring gasket.

2-micron Bio-Tek water & particulate filter delivers up to 25 GPM (94 L/min), with 1 - 12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

Complete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...

GPI Multi-Plane Hose Swivel attaches between a fuel hose and nozzle, providing 360 spherical rotation. The lightweight swivel prevents hose twistin...

3/4-inch NPT cast aluminum filter adapter rated for 18 GPM fuel transfer pumps. Supports secure filter installation and helps protect pump systems.