Contact Sales & Tech Experts
Contact Sales
& Tech Experts
GPI Adjustable suction pipes provide the best seal technology on the market. Adjusts from 15 to 40 inches to fit most standard tank sizes. The soli...
View full detailsGPI Particulate Filter Kit for electric fuel transfer pumps. It helps remove dirt, dust, rust, and other common fuel contaminants to protect your f...
View full detailsThe GPI 110382-501 inlet fitting kit includes one 2-inch NPT x 1.25-inch NPSM inlet fitting with O-Ring. This part is compatible with M-150S 12V GP...
View full detailsThe GPI Electric Fuel Pump Bung Adapter Kit (#110909) includes a tank bung adapter bushing and an NBR rubber union ring gasket.
Easily replace the power switch in the field with this kit
GPI Multi-Plane Hose Swivel attaches between a fuel hose and nozzle, providing 360 spherical rotation. The lightweight swivel prevents hose twistin...
View full detailsGPI's fuel suction pipe extension will add another 15 inches to your adjustable GPI composite suction pipe.
GPI 10 micron, 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread.NOTE: May substitute for a fi...
View full detailsThe GPI 137030-505 Bung adapter includes one 1" NPT bung adapter. This part is compatible with EZ-8 12V GPI pumps.For use with EZ-8 direct mount mo...
View full detailsEverything you need in one convenient set, the EZ8 pump Rebuild kit is the perfect addition to any garage or workshop. The handy kit includes a mot...
View full detailsEverything you need in one convenient set, the EZ-8 fuel transfer pump rebuild kit is the perfect addition to any garage or workshop.
The GPI 137078-501 replacement motor helps extend the life of the EZ-8 fuel transfer pump. Includes motor assembly and switch.NOTE: For EZ-8 pumps ...
View full detailsComplete your fueling system today with GPI's 3/4 in. NPT x 14 ft. (4.3 m) fuel hose kit with spring support and static wire for use with AC or DC ...
View full detailsGPI 10 micron water and particulate filter for use with fuel transfer pumps up to 18 GPM with No 1-12 UNF mounting thread.NOTE: May substitute for ...
View full detailsUse GPI 3/4-inch NPT Cast aluminum filter adapter to complete your filter installation setup on your fueling system. Protect your pump today with G...
View full detailsGPI's 3/4-inch FNPT Black Diamond no-fail manual nozzle is the most durable, best performance nozzle on the market! Designed to last a lifetime.
GPI 10 micron 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread includes draincock.NOTE: May s...
View full detailsGPI 110412-515, 15ft. (4.5 m) Power Cord Assembly with Strain Relief Connector is designed for use with GPI EZ-8 Series pumps. The 14/2 AWG cord co...
View full detailsComplete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...
View full detailsThis cast aluminum nozzle cover kit can be used with an EZ-8, M-150S-EM, or M-150S-E-PO fuel transfer pump. The kit comes with (2) 1/4-20 x 1/2-in...
View full detailsKeep your EZ-8 fuel transfer pump flow rate high with the easy-to-install bypass poppet replacement kit
GPI 2-micron Bio-Tek water & particulate filter delivers up to 25 GPM (95 L/min), with 1 - 12 UNF mounting thread.NOTE: May substitute for a fi...
View full detailsThe GPI Battery Clamp Kit (#902010-51) is designed to quickly and conveniently connect a 12 V(dc) fuel transfer gear pump to a DC power supply. Inc...
View full detailsKeep your EZ-8 fuel transfer pump well-maintained with this easy-to-install Switch Coverplate replacement kit.