Best selling products

GPI's adjustable suction pipe provide the best seal technology on the market. Adjusts from 15 to 40 inches to fit most standard tank sizes. The sol...

18 GPM 10 micron particulate filter kit for fuel transfer pumps. Helps remove contaminants to protect pumps and maintain clean fuel flow. NOTE: May...

The GPI gear pump overhaul and conversion kit is designed to help keep GPI 12-volt, 24-volt, and 115-volt gear pumps running as long as possible. C...

2-inch NPT standard tank bung adapter for fuel transfer pumps. Includes tank bung adapter bushing and NBR rubber union ring gasket.

GPI Multi-Plane Hose Swivel attaches between a fuel hose and nozzle, providing 360 spherical rotation. The lightweight swivel prevents hose twistin...

Circuit breaker and switch kit for M-1115 fuel transfer pumps. Genuine replacement parts restore safe electrical control and operation.

Replacement NBR union ring gasket for M-Series and G20 fuel transfer pumps. Helps maintain a leak-free pump-to-tank connection.

Nozzle cover kit for M-Series fuel transfer pumps. Genuine replacement kit designed to protect nozzle assemblies and restore proper fit.

Replacement motor for M-1115S fuel transfer pumps. OEM part compatible with M-1115S-AU, M-1115S-MU, and M-1115S-PO models to extend pump service life.

Composite suction pipe extension for fuel transfer pumps. Adds 15 inches to GPI adjustable suction pipe for deeper tank reach.

Automatic unleaded shut-off nozzle is designed to attach to a 0.75 in. fuel hose for safe, reliable dispensing of gasoline, diesel fuel, and kerose...

Bypass poppet kit for M-150S, M-240S, and M-1115S fuel transfer pumps. Helps maintain flow rate. Does not fit M-180S (use kit #110500-05).

10 micron water and particulate filter for use with fuel transfer pumps up to 18 GPM (69 L/min), with No 1-12 UNF mounting thread. 50PSI operating ...

10 micron, 18 GPM (69 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

Replacement inlet strainer for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Helps protect pumps and maintain peak performance.

3/4-inch NPT cast aluminum filter adapter rated for 18 GPM fuel transfer pumps. Supports secure filter installation and helps protect pump systems.

Replacement switch cover plate kit for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Easy to install and designed to protect internal co...

GPI's 3/4-inch FNPT Black Diamond no-fail manual nozzle is the most durable, best performance nozzle on the market!

Gear cover plate replacement kit for M-1115S, M-150S, and M-240S fuel transfer pumps. Does not fit M-180S (use kit #110500-08). Designed for easy i...

Electrical cover plate replacement kit for M-Series fuel transfer pumps. Easy installation helps protect wiring and maintain reliable operation.

Wet seal kit for M-1115S, M-150S, M-180S, and M-240S fuel transfer pumps. Designed to replace worn seals and extend pump service life. Quick and ea...

12 ft. (3.7 m) fuel hose with static wire for AC and DC electric fuel transfer pumps and hand pumps. 3/4-inch NPT connections support safe, reliabl...

2-micron Bio-Tek water & particulate filter delivers up to 25 GPM (94 L/min), with 1 - 12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

Complete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...