New products

Multi-plane hose swivel attaches between a fuel hose and nozzle, providing 360 spherical rotation. The lightweight swivel prevents hose twisting an...

Quick-Fit 25 GPM, (94 Lmin) replacement filter for GPI and GPRO modular fuel transfer pumps. Removes dust, dirt, rust, and other contaminants to pr...

The GPI LP-50 fluid transfer hand pump is a lever-action pump designed to fit tanks or 55-gallon barrels and delivers up to 1 pint (0.5 Litre) per ...

Extreme temperature shaft seal kit for GPRO vane pumps. Designed for cold weather use to maintain performance and prevent seal failure.

2-micron Bio-Tek water & particulate filter delivers up to 25 GPM (94 L/min), with 1 - 12 UNF mounting thread. 50 PSI operating pressure. NOTE:...

GPI's 3/4-inch FNPT Black Diamond no-fail manual nozzle is the most durable, best performance nozzle on the market!

2 micron Bio-Tek water & particulate filter for use with fuel transfer pumps up to 40 GPM (151 L/min). 50 PSI operating pressure. NOTE: May sub...

The GPI M30 mechanical fuel meter is designed for the field measurement of thin viscosity petroleum fuel only and intended for use with pump system...

B100 shaft seal kit for GPRO vane pumps. Converts pumps for B100 fuel use and includes shaft seal, retaining ring, and spacer washer. Requires 40�F...

10 micron particulate filter with draincock. It delivers up to 18 GPM (67 LPM), with 1 3/8 - 12 UNF mounting thread. 50 PSI operating pressure. NOT...

The GPI M-180 Series Fuel Transfer Pump provides longer run times and reliable performance year after year. Delivering flow rates up to 18 GPM (69 ...

The GPI HP-100 Fluid Transfer pump is a premium fuel piston hand pump that is reliable and versatile, delivering the highest flow rate in the indus...

The GPI DP-20 fluid transfer hand pump is a lever-action diaphragm pump that delivers up to 20 gallons per 100 strokes and provides exceptional per...

The GPI gear pump overhaul and conversion kit is designed to help keep GPI 12-volt, 24-volt, and 115-volt gear pumps running as long as possible. C...

Rebuild kit for EZ-8 fuel transfer pumps manufactured before 2016. Includes a motor shaft key, two gears, & a set of replacement seals.

Complete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...

The GPRO V25 series is the next-generation modular vane pump. The V25 is engineered to deliver consistent high-pressure performance from a tough, h...

Replacement seal kit for G20 fuel transfer pumps. Designed for quick installation to maintain sealing and extend pump life.

Automatic diesel shut-off nozzle is designed to attach to a 1-inch fuel hose for safe, reliable dispensing of gasoline, diesel fuel, and kerosene. ...

Rebuild kit for G8P portable fuel transfer pumps.Includes motor shaft seal, pump gears, bypass poppet parts, and replacement o-rings.

1 in. NPT x 18 ft. (5.5m) U.L. Listed fuel hose assembly with static wire for use with AC or DC electric fuel transfer pumps.

The GPI Lightweight Oil Transfer Pumps are engineered to deliver flow rates up to 8 GPM (30 L/min) for use with non-flammable oil-based solvents. D...

The FLOMEC LM51DN Digital Lube Meter Series is an electronic disc meter for use with engine oils, transmission fluid (max viscosity SAE 140), and a...

The GPRO V25 series is the next-generation modular vane pump. The V25 is engineered to deliver consistent high-pressure performance from a tough, h...